The OasisFly25 from Sub250 is an thrilling 2.5-inch FPV drone, geared up with the DJI O3 air unit and weighing underneath 250g, making it good for compact, freestyle flying. This drone is sufficiently small to slot in your pocket but packs loads of energy. It’s designed for individuals who love the fun of freestyle flying in tight areas or parks. On this evaluation, I’ll stroll you thru my expertise with the OasisFly25, together with its specs, efficiency, flight traits, and whether or not it lives as much as the hype.
The place to Purchase
You should purchase the OasisFly25 from these distributors:
The drone is out there with the DJI O3 system and a receiver put in, however there’s additionally a plug-and-play model if you wish to use a special FPV system and receiver.
Contained in the field, you’ll discover the drone and two accent bins containing:
- Two units of HQ 2.5×2.5×3 tri-bladed propellers
- Stickers and manuals
- Spare screws, standoffs, and a hex key
- 3D-printed digicam holders (together with one for a unadorned GoPro)
- USB-C adapter for the flight controller
Notice that batteries are offered individually: https://oscarliang.com/product-fmf7
Spare propellers: https://s.click on.aliexpress.com/e/_Dkaokyp
Specs
- Flight controller: F7 with 35A ESC, which is spectacular for a 2.5-inch drone
- Body: Sub250 Oasis Body, 135mm wheelbase, with 2mm high plate and a couple of.5mm backside and arm thickness
- Flight controller: Redfox A3 F722 45A AIO
- Digicam/VTX/Antenna: DJI O3 Air Unit
- Motors: Sub250 1404 4500kv
- Propellers: HQ2.5×2.5×3
- Receiver choices: PNP, TBS Crossfire Nano, ELRS 2.4G
- Battery connector: XT30
- Really helpful battery: 4S 530-730mAh LiPo (not included)
- Weight: 174g (with out battery), 241g with 4S 720mAh
Construct High quality and Design
The OasisFly25 boasts a smooth and sturdy design, combining carbon fiber and CNC aluminum for energy and stability. The straightforward, efficient design means it’s straightforward to take aside when it is advisable to restore it. The body options replaceable arms, permitting you to swap out damaged arms with no need to interchange all the body. Spare body elements can be found on the Sub250 web site.
Weighing 174g with no battery and 241g with a 720mAh 4S pack, the drone is probably a bit heavy for a 2.5″ drone, however the construct could be very sturdy. The DJI O3 system supplies a top-notch video feed, making this an incredible drone for recording high-quality footage.
The lengthy body physique design means the propellers aren’t seen within the FPV digicam’s view, so it doesn’t damage your shot which is nice. There’s sufficient room so that you can place a secondary digicam like a unadorned GoPro if you want.
One minor draw back is the absence of a USB port on the flight controller, requiring a particular dongle to configure Betaflight. Whereas not a deal-breaker, it provides some inconvenience if it is advisable to make frequent modifications.
The OasisFly25 body also can accommodate the Walksnail Moonlight Digicam and an analog setup, including versatility.
The OasisFly25 has a sturdy development and it could possibly take a beating, however I’d nonetheless suggest getting further props and arms simply in case. I had a couple of crashes throughout testing, and the drone held up nicely, with solely minor scratches on the motors and body. The 3D-printed motor protectors additionally did their job, absorbing influence and preserving the motors in fine condition.
Flight Efficiency
Now, let’s speak about the way it flies.
Utilizing the advisable 4S 720mAh LiHV battery brings the whole weight to 241g, which is barely heavy for a 2.5″ FPV drone. This setup gained’t go away room for a unadorned GoPro if you wish to keep underneath 250g, however the drone nonetheless performs extremely nicely.
Proper from the primary takeoff, I used to be impressed by the drone’s energy. Regardless of its small dimension, it gives glorious acceleration and stability, even in very windy situations. It hovers effortlessly at 25% throttle, and with just a bit throttle punch, it shoots up like a rocket. I used to be flying in 23MPH wind, the drone nonetheless felt locked in and steady, with little or no propwash throughout aggressive maneuvers, and it wasn’t overly noisy.
Though the additional weight lowered some effectivity, the drone nonetheless dealt with nicely, providing about 5 minutes of aggressive flying. In the event you’re cruising, you’ll be able to stretch the flight time to over 7 minutes. The OasisFly25 strikes a very good stability between agility and effectivity.
With no propellers in view, you’ll be able to seize clear footage whether or not you’re flying slowly or quick. The antenna efficiency was glorious, sustaining a powerful sign all through my flights.
That is most likely probably the greatest 2.5″ quads with the DJI O3 I’ve flown for freestyle. It has that “flingability” you get from bigger quads like a 5″, probably as a consequence of its heavier weight. It’s received the punch to throw round simply within the air, and inverted strikes and dives are clear and clean, with out the uncontrollable washout seen in lighter micros. These qualities are key for a very good freestyle quad. Whereas it’s not as highly effective as a 5″, it’s nonetheless responsive, punchy, and agile. Importantly, it’s quiet, so it gained’t disturb folks close by.
When flying in tighter areas just like the woods, I used to be principally working between the 20% to 30% throttle vary, just like a 5″, but it surely was a lot simpler to maneuver as a consequence of its lighter weight and nimbleness in comparison with a bigger quad.
I additionally examined smaller batteries, like a 4S 450mAh, however the flight time was nearly halved in comparison with the 720mAh. Whereas the lighter weight did enhance flight efficiency, the lowered flight time didn’t justify the trade-off in my view. I’d suggest sticking with the 4S 720mAh from Sub250 for one of the best total efficiency: https://oscarliang.com/product-fmf7
What May Be Improved
I don’t a lot a lot destructive to say concerning the Oasisfly25, fairly comfortable about its design and efficiency actually. The one factor is weight.
The body’s sturdiness provides further weight, and whereas this contributes to its sturdiness, I’d have most well-liked a lighter construct for higher effectivity and agility. Nonetheless, the trade-off for sturdiness is comprehensible.
You may scale back weight by eradicating the 3D-printed toes or utilizing the Flywoo O3 bare equipment to make the DJI O3 Air Unit 15+ grams lighter. Changing the unique O3 antenna with light-weight dipole antennas also can shave off a couple of grams, which is an inexpensive selection for many customers who gained’t be flying lengthy vary with this mannequin.
One other minor suggestion: making the battery lead barely longer would scale back stress on the solder joints.
Lastly, I’d like to see a bit extra safety for the DJI O3 digicam, a small protruded 3D printed piece hooked up to the entrance of the underside plate would do a very good job. For now I believe it’s essential to make use of an ND filter, or only a clear UV filter to guard the lens from scratching: https://oscarliang.com/flywoo-nd-filter-o3/
Methods to Setup
The flight controller comes pre-installed with Betaflight 4.4.3 (firmware goal: SUB250REDFOXF722AIO). The ESC comes with BLHeli_32 firmware 32.9.
To arrange this drone for first flight, here’s what I did:
Binding ELRS Receiver
- The ExpressLRS receiver comes with ELRS 3.3.1 firmware, with the goal Sub250 2400 RX.
- Energy the receiver (by way of battery or USB) and anticipate it to enter WiFi mode (indicated by a quickly flashing LED).
- Hook up with the ExpressLRS receiver’s WiFi community in your telephone, open browser and go to 10.0.0.1, and enter your binding phrase.
- Comply with different binding strategies, see my detailed directions right here: https://oscarliang.com/bind-expresslrs-receivers/.
Binding DJI O3 Air Unit
Betaflight Setup
- Set your personal charges.
- Configure switches for arm, angle, beeper, and turtle mode.
That’s it!
Ultimate Ideas: Is the Sub250 OasisFly25 Price It?
Completely! The Sub250 OasisFly25 FPV drone gives incredible efficiency in a compact, sturdy design. It’s quick, responsive, and excels at freestyle flying. Though it’s barely heavier than superb, the sheer enjoyable and flexibility it supplies make up for the added weight.
For $396 with the DJI O3 system, the OasisFly25 is well-priced and excellent for each inexperienced persons and skilled pilots searching for a transportable, sub-250g freestyle drone. You should purchase the OasisFly25 from these distributors:
In the event you’re out there for a robust and compact freestyle drone, the OasisFly25 is a strong selection that gained’t disappoint.
